HOME | SITE MAP | ABOUT | BLOG

November 9-13, 2008 in Booth E-6660 at McCormick Convention Center in Chicago, IL. We will be featuring our PL100 and PL165 series of Applicators. Don’t be surprised to see our equipment in the booths of other suppliers as well!

To see all NSI's upcoming events CLICK HERE.
To find out more about the Pack Expo CLICK HERE.

Spring 2008 – Our newest product platform is our 165 series of Applicators. These Applicators provide a capacity for components up to 100 x 165mm in size with extreme accuracy (as good as +/- 0.05mm), high reliability, and maximum affordability.

For more information about the PL165i and PL165r CLICK HERE.

+/- 0.0175mm Placement Accuracy! (Third-party study results) – April 2008 – An NSI customer has conducted an independent study of the placement accuracy of a PL100i Applicator configured with the optional EP upgrade package. The customer component was a rectangular Insulating Tape component of outside dimensions approximately 75 x 75mm with a large portion of the center of the rectangle removed (i.e., a ‘frame’ shaped component) Across a 500 pc study sample the customer measured a total placement range of 70 microns (0.070mm) or +/- 35 microns (0.035mm). This total range dimension included any variability in placement of the die-cut component by the PL100i and also added variation in the Fixture for the substrate to which the Tape was applied. In addition, a variation in the die-cut wall of the component was measured at 40 microns. This means that the PL100EPi system contribution to the placement range was actually 35 microns, or +/- 17.5 microns. Indeed, this customer was greatly pleased with the results and determined that the PL100EPi provided a process capability (Cpk) of greater than 2.5!

For more information about the PL100EPi CLICK HERE.