This module is available for integration on PL100r and PL100EPr Feed Systems. It is intended for components up to 50 x 50mm in size. This module provides the unique function of removing the adhesive component from the liner on one plane and then rotating the adhesive component 180 degrees to reposition the adhesive component in an ‘upside down’ orientation relative to the peel surface with the exposed adhesive surface facing away from the vacuum chuck. The RT180 can be configured with various lengths of stroke up to 60mm. This application may be useful when an adhesive component must be applied to the bottom surface of a substrate but mounting a PL Series unit with a Standard Tamp upside down may not be possible due to physical space constraints. See images and video for a demonstration.